25 Gallons ?....... More like 30 Gallons
See the proof ! Click Here, Watch the YouTube 32 Gallon performance test
Fully equipped M625 HDP Kayak Bilge Pump
Bellows Cord Locked Bellows deployed
Discharge Elbow On Elbow and 4" hose tied down
Dewatering Sipper off Elbow tied down, 4" hose off
Model 625 HDP Kayak Bilge Pump
Whether it's a Rigid or Inflatable Kayak, Raft, Canoe, Aluminum Hull Boat, Catamaran, getting swamped is always a concern. In rough water, all of that onboard water sloshing around can not only cause maneuverability issues but affect stability and be a visual hazard too. When there's a need to bilge, don't piddle around, move water with a M625HDP Kayak Bilge Pump.
TRANSFER: Powerful hand powered Kayak Bilge Pump capable of transferring over 25 gallons per minute, that's 5 - five gallon buckets! Quick release storage lanyard allows for immediate response with rugged "CONVOLUTED CYLINDER BELLOWS POWER" pumping action. Standard 12" clear plastic intake pipe (18" or 24" optional).
DEWATERING: With the sipper attached transfer water, sand, silt, and rocks up to 5/8". Remove the sipper valve and transfer bait tank water , with minnows, anchovies and even ROCKS up to 1 1/2".
WASHDOWN: Before putting ashore, use the M625 HDP Kayak Bilge Pump as a wash down pump, then suction out all of the accumulated rocks, sand, silt and mud. No need to worry about abrasive wear either, this is the same pump construction as the M625HDP Gold Hand Dredge and is designed to handle the task!
ERGONOMICS: Flexible bellows pump handle and pump body can be positioned independently providing comfortable gripping during near effortless operation. Full pump strokes average a comfortable 9" to 10" and virtually eliminate range of motion limitations. Since suction is created using a "Bellows", there's ZERO (0) barrel/piston pull restistance and ZERO piston/barrel skippage so that each pump stroke transfers the intended volume of water. The discharge port is fitted with a one-way cap valve and built in "Non sand fouling" bearing that is large sized 2" spigot and accepts 90 degree 1 1/2" X 2" reducing "JETTING ELBOW" for controlling the massive squid plumes of water being discharged.
MAINTENANCE: Replaceable diaphragm (ie., convoluted cylinder bellows) and flappers for easy self maintenance and extended pump life. Can be disassembled into 2 sections 16 1/2" (Body) and 12 1/2" (pipe). Quick release lanyard to keep diaphragm compressed in between deployments. Extra long cord to thread through elbow helps keep components together for storage. All Marine Grade Stainless Steel clamps and fasteners eliminates any worries about salt water corrosion forever.
Get the "FEEL" now. Watch YouTube Video 32 Gallon Performance Test transfer over 30 gallons in under 1 minute. (Controlled environment: Pump body affixed to reservoir by multifunction spring clamp)
Can also be used by Treasure Hunters while scuba diving. Caution though, stirring up sediments while scuba diving can create unsafe conditions.
Not included but available:
Blue Closed Cell Polyethylene Foam Buoy (picture above top) for over 3 1/2 lb of flotation lift.
Nylon Micro Mesh Specimen Bags that can be secured to the discharge hose ending.
Clear 1 1/2" PVC Pipe in 18" and 24" lengths.
Check for parts and supplies below and elsewhere in this website.
